AIDA64 Sensor Panel Installation Instructions
AIDA64 Sensor Panel Installation Instructions
==============================================
1. Install AIDA64 Extreme
- Download and install AIDA64 Extreme from: https://www.aida64.com/downloads
- Make sure you have the latest version for full SensorPanel support.
2. Enable SensorPanel
- Open AIDA64.
- Go to File → Preferences → SensorPanel.
- Check "Show SensorPanel" to enable it.
- A blank SensorPanel will appear on your screen.
3. Load the SensorPanel Skin
- Right-click on the blank SensorPanel.
- Select "Load...".
- Choose the .sensorpanel file you downloaded from www.aida64skins.in.
4. Adjust Settings (Optional)
- Move or resize the panel as needed.
- Set options like:
- Start with Windows
- Always on top
- Transparency
5. Customize Sensors (if needed)
- Right-click → Edit SensorPanel.
- Double-click on a sensor item to assign the correct hardware sensor.
6. Save Your Setup
- After making changes, right-click → Save your customized SensorPanel.
Important Tips
------
--------
- Make sure your system's drivers are up-to-date (GPU, CPU, Motherboard sensors).
- Always use the latest version of AIDA64.
- Not all sensors are available on all hardware (e.g., VRM temps).
Troubleshooting
---------------
Problem: SensorPanel not showing
Solution: Check that "Show SensorPanel" is enabled in Preferences.
Problem: Wrong temperature or sensor values
Solution: Manually reassign the correct sensor.
Problem: Skin layout broken
Solution: Check your screen resolution and scaling settings.
Problem: AIDA64 crashing
Solution: Update AIDA64 to the latest version.
Contact
-------
For help or new skins, visit: www.aida64skins.in
Email: [email protected]
Confirm the SensorPanel matches the size of the layout you’ve downloaded Select “Apply” and confirm with “OK”